Interconnect cable - Van Den Hul 3T D-102 MK3 Hybrid - RCA to RCA (1.0 to 5.0m)
With Van Den Hul ever continuing technical improvements, it is logical to replace the 1982 D-102 Series (upgraded 24 times) by an actual HYBRID version.
PRICE FOR A PAIR
To get a length above 5 meters please contact us at contact@audiosoundmusic.com
Together with the Linear Structured Carbon® technology, Van Den Hul has therefore applied some number of strands from highly acclaimed 3T technology into the new D-102 III Hybrid.
The D – 102 III HYBRID is a warm yellow-orange coloured very flexible balanced interconnect with a 3 layer shielding.
- The 2 centre conductors are made of 40 dense and very pure silver coated strands made of a very high grade Matched Crystal (MC) OFC. Over each centre conductor an extra Linear Structured Carbon® (LSC) saturated layer is applied.This extra layer of LSC highly improves the quality of the signal transmission by performing electrical bridging on micro-scale and by converting the external magnetic field close to the conductors into an electrical signal again.
- 4 strands of 3T have been applied into the design. 3T: True Transmission Technology offers a much higher resolution and detail compared to any other metal technology used so far.
- The resistance of each centre conductor is 5.5 Ohm/100 meter.
- The capacitance between the 2 internal conductors is a very low 37 pF/meter; in balanced operation, even in rather high impedant circuitry, the overall losses and/or phase-shift remain very low.
In unbalanced operation the two internal conductors can simply be taken together with the shield acting as the signal return, though the better and preferred layout (which we apply) has the shield only connected to signal ground at the signal source side (marked by a ground-end marking sticker) and one of the internal conductors functions as signal return.
Features
- Design purpose : Interlink
- Available versions: Balanced (XLR), Unbalanced (RCA)