Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)
Turntable Pro-ject Debut PRO S (Clamp not included)

Turntable Pro-ject Debut PRO S (Clamp not included)

badge
€899,00
VAT included in price for European Union countries. VAT may be adjusted based on delivery country at check-out. Shipping cost (free above 99€ purchase within European Union) will be added at check-out.
banner
MOST EQUIPMENT ARE MANUFACTURED TO ORDER AND REQUIRE EXTENDED DELIVERY TIME
Three to four weeks are usually necessary, sometimes much more

A milestone for the next decade

 

Tonearm, Cartridge & Dustcover included

Clamp not included

 

The Debut PRO S brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound.

The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO S to its modern simple, elegant and unprecedented design.

The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.

The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing also MC cartridges to work properly.

The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO S.

The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

 

Features:

  • Speed:   33, 45/(78) (electronic speed change)
  • Drive principle: belt drive with electronic speed control
  • Platter: 300mm, die cast aluminium platter with TPE damping and felt mat
  • Platter bearing: high precision stainless steel axle in bronze bushing
  • Wow & flutter:  33: +/-0,16%; 45: +/-0,14%
  • Speed drift: 33: +/-0,40%; 45: +/-0,50%
  • Signal to noise: 68dB
  • Tonearm: 10“ S-shape aluminium; SME connector
  • Effective arm length/mass: 254 mm / 8 g
  • Overhang: 16 mm
  • Included accessories: 15V DC / 0,8A power supply, dust cover, 78 RPM round belt, 7‘‘ single adapter
  • Power consumption: 4W / 0W standby
  • Dimensions: 462 x 145 x 345mm (W x H x D)
  • Weight: 7 kg net

 

MM Cartridge Pick it S2 C :

  • Needle type: elliptical
  • Weight: 18.5 g
  • Stylus tip radius: 13/25 µm
  • Frequency response: 20 - 22.000 Hz
  • Output voltage: 6 mV
  • Channel separation: 24dB @ 1kHz
  • Compliance dynamic/lateral: 7 µm/mN
  • Tracking force range: 2.0-5.0 g
  • Tracking angle: 20°
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kΩ
  • Recommended load capacitance : 200-600 pF

                    Recently viewed