Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)
Turntable Pro-ject X2B (Clamp not included)

Turntable Pro-ject X2B (Clamp not included)

badge
badge
badge
€1.599,00
VAT included in price for European Union countries. VAT may be adjusted based on delivery country at check-out. Shipping cost (free above 99€ purchase within European Union) will be added at check-out.
banner
MOST EQUIPMENT ARE MANUFACTURED TO ORDER AND REQUIRE EXTENDED DELIVERY TIME
Three to four weeks are usually necessary, sometimes much more
Color

The beginning of a new balanced era

EISA Best Product 2022-2023 Award for True Balanced

 

Tonearm, Cartridge and Dustcover included

Clamp not included


    NEW “True Balanced Connection” by Pro-Ject

    Balanced audio connections are usually known from the professional sector like recording studios or live concerts. It is very important to have a stable & interference free connection, as these signals, especially microphone signals, will be highly amplified. The same applies to the connection from your turntable to the phono preamplifier. The big advantage of a balanced connection is its ability to remove picked up noise and interferences.

    Balanced connections use three wires for one channel: ground, a hot and a cold wire. The cold wire carries the inverted (reversed in polarity) hot signal.

    At the receiving end, the cold signal is flipped and added together. The trick happens here: If the cable picks up any noise, the noise is added to both signals. So, a positive interference is a positive tick on the hot and on the cold signal. If you now flip one of them, the interference is also inverted, so you get the same interference once in a positive and once in a negative direction. If you now add these two signals, the noise will cancel out.

    The X2 B is our first turntable with a fully balanced mini XLR output which offers you a symmetrical connection to our new Phono Box S3 B or Phono Box DS3 B.

    To use our True balanced connection your turntable needs to be equipped with an MC cartridge, so the X2 B comes with a premium Ortofon Quintet Red MC cartridge pre-installed.

     

     

    Includes:

    • NEW RCA phono & 5-pin mini XLR output
    • Pre-adjusted Ortofon Quintet Red cartridge
    • Electronic speed control with 33/45 rpm speed change
    • Sub-platter with extremely low bearing tolerances
    • Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise
    • 9” one-piece carbon/aluminium tonearm tube
    • TPE damped counterweight
    • Azimuth and VTA adjustment
    • Resonance free, 2 kg heavy acrylic platter
    • Heavy, 50 mm thick, highest quality CNC‘d MDF chassis
    • Luxury 8 layers of painting or real-wood veneer
    • Shielded, semi-symmetrical, low-capacitance cables
    • Height adjustable, alu machined, vibration absorbing feet

     

    Handmade in Europe

     

    Real high-end features:

    • Speed: 33, 45, 78 (electronic speed change)
    • Outputs: Phono RCA & 5-pin Mini XLR
    • Drive principle: belt drive
    • Platter: 30mm thick acryl, 2 kg heavy acryl
    • Mains bearing: stainless steel
    • Speed variance: 33: +/-0,25%; 45: +/-0,20%
    • Wow and flutter: 33: +/-0,12%; 45: +/-0,10%
    • Signal to noise: 70dB
    • Tonearm: 9” carbon/aluminium sandwich tonearm
    • Effective tonearm length & mass: 9“/230 mm & 13,5 g
    • Overhang: 18 mm
    • Tracking force: 0 - 30mN
    • Power connection: 110 - 240 V, 50/60 Hz
    • Power consumption: 4.5 W max / 0.3 W standby
    • Dimensions: 460 x 150 x 340 mm (WxHxD) lid closed
    • Weight: 10 kg

     

    Included accessories:

    • 15V DC / 800 mA power supply,
    • dust cover
    • Connect it Phono E RCA cable
    • felt mat

                            Recently viewed