Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic
Turntable EAT PRELUDE - AudioSoundMusic

Turntable EAT PRELUDE

€1.253,00
worldwide-delivery
VAT included in price for European Union countries and may be adjusted based on delivery country at check-out.
Average shipping time : 4 to 5 weeks. Shipping is free within European Union (except for specific territories) above 99€ purchase up to 50kg. Shipping costs on quote above 50kg – quote request to be send to : contact@audiosoundmusic.com. There is no return policy for countries outside of the European Union.

High end turntable with timeless design. A genuinely affordable deck with neutral sound.

Tonearm, Cartridge, Clamp & Dustcover included


« (...) the EAT Prelude is every bit a high-end turntable that just forgot to get too expensive. Partner this with sympathetic giant-killers and you could build a true low-cost high-end superstar system. If you want to know what real high-end audio sounds like, without opening your wallet and saying ‘help yourself!’ to the dealer, the EAT Prelude is your turntable » HiFi+ Issue 170

 

"In our unending quest (yes really) to find turntables that break the mold of fitting every price point at the expense of value and quality, we happily present the EAT line. These tables with all their tech and cosmetic beauty really should be more than twice their price. But given the access to a large factory, they are able to keep the prices down allowing music lovers an amazing value. This is a lot of table for the money." True Audiophile

 


Rigid MDF chassis

  • Heavy weight aluminium platter
  • Precision diamond-cut pulley
  • Belt drive principle
  • 2M Red cartridge
  • Carbon tonearm
  • DC power supply for ultimate speed stability
  • Dust cover included

 

EAT is acclaimed for true high-end turntables that drive physics to the theoretical maximum. With the considered use of mass, EAT has waged a war on unwanted vibration, resonance and colouration of the sound. Now EAT offers for the first time a deck which is genuinely affordable but able to provide neutral sound.

 

To reach the price target, there have to be compromises, but the basic principles remain the same: Only a heavy-weight platter can give you the correct speed and precision. We use a low tolerance (0.01) polished stainless steel bearing in a soft bronze bushing, to ensure a super silent and smooth movement. This is the same base material as in our high-end designs. Supplied with the turntable is a pre-fitted Ortofon 2M Red cartridge as well as an acrylic lid for protection from dust.

 

The elegant piano lacquer finish fits into every home or type of decor. We also offer the Prelude with the EAT iconic green motor and belt.

 

Our plinth is made out of dense MDF, protected by eight layers of lacquer which produce a luxurious look and finish. This is a first in a price category where the norm is a particle board chassis with glued-on veneer. For the motor, we avoid a mass-loaded design. Instead, we have a free-standing motor with no connection to the board; this is the only way to ensure no motor vibrations are passed on.

 

Most of our customers making purchases in this price range will use an MM (moving-magnet) cartridge. To address this, we went chose a lightweight, ultra-stiff and resonance-free carbon tonearm tube, which is cast in a single piece. We deliberately avoided a heavier metal headshell, as a lightweight design simply creates more ideal resonant frequencies with an MM cartridge.

 

Equally unusual at this price is the bearing block for the tonearm and the counterweight. The mass bearing block behaves like an energy sink for all resonances from the cartridge, as well as the low frequencies from the deck. The counterweight implements an anti-resonator damper to reduce the amplitude of the natural tonearm/cartridge resonance.

 

We have chosen one of the "best buy" cartridges available today, a perfect partner for Prelude. The discerning listener will recognise that the Prelude tonearm elevates the 2M Red to a completely new level of performance.

 

We know that all low mass turntables tend to sound boomy because of the stored energy and vibrations, especially when compared to costlier, more massive designs. The Prelude will surprise listeners through its astonishing lack of colouration and exceptional dynamics. It is the perfect starting point for assembling a true audiophile hi-fi system.

 

Features:

  • NOMINAL SPEED: 33/45 RPM, manual speed change
  • SPEED VARIANCE: 33 RPM: <0.15%; 45 RPM: <0.13%
  • WOW AND FLUTTER: 33 RPM: <0.1%; 45 RPM: <0.09%
  • SNR: - 67 dB
  • DOWNFORCE RANGE: 0 – 30 mN, 0 – 3 g
  • COUNTERWEIGHT FOR MASSES: 6 – 12 g
  • EFFECTIVE TONEARM MASS: 8 g
  • EFFECTIVE TONEARM LENGTH: 230 mm
  • OVERHANG: 18 mm
  • POWER CONSUMPTION: 5W max; 0.3W standby
  • VOLTAGE: 15V DC, 1.6A
  • WEIGHT: 5.5 kg
  • DIMENSIONS W × H × D: 415 × 130 × 335 mm

 

Option : On customer's site installation and set-up within European Union

After delivery of the package, one of our team members will take an appointment at the address of delivery to install your equipment, and make sure it is properly set-up.

To buy an installation service please click here

 

            Recently viewed